X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-013-21143

Well Details

Well ID: 34-013-21143
Loading map...
Country: United States
State: Ohio
County: Belmont
Municipality: Smith Township
Operator Name: RICE DRILLING D LLC
Well Pad ID:
Farm/Lease Name: DOMINATOR
License Status: Plugged Back
License Date: 2016-12-07
Spud Date: 2017-03-20
Spud Drilling Contractor: NOMAC DRILLING CORP
Final Drill Date: 2017-04-26
Well Total Depth:
Configuration: Vertical
Latitude: 39.941948044
Longitude: -80.93162346

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2016-12-07 Proposed Formations:UTICA THRU POINT PLEASANT, Issued Date:12/7/2016, Expired Date:12/7/2017 12:00:00 PM, Drilling unit acres:0, Proposed Well Type:ST, Proposed Well Class:STRT
Correction to Well 2017-03-24 CORRECTION TO PROPOSED GEOLOGICAL FORMATION.
Plugged Back 2017-04-26 SEE HORIZONTAL WELL (34-013-2-1143-01-00) IMAGES FOR COMPLETION INFO. ALE 10/04/2017
Reached Total Depth 2017-04-26 SEE HORIZONTAL WELL (34-013-2-1143-01-00) IMAGES FOR COMPLETION INFO. ALE 10/04/2017
Completion Report Received 2017-07-23 SEE HORIZONTAL WELL (34-013-2-1143-01-00) IMAGES FOR COMPLETION INFO. ALE 10/04/2017
Record Last Modified 2017-10-23 SEE HORIZONTAL WELL (34-013-2-1143-01-00) IMAGES FOR COMPLETION INFO. ALE 10/04/2017
Construction Permit Expires 2018-12-07 SEE HORIZONTAL WELL (34-013-2-1143-01-00) IMAGES FOR COMPLETION INFO. ALE 10/04/2017

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2018-08-30 9974 10112 0
2018-08-30 22045 22093 0

For data sources see[3]

Fracking Activities

Fracking Jobs

Job Number Job Start Date Job End Date True Vertical Depth (ft) Total Water Volume (gal) Total Non-Water Volume (gal)
1 12/02/2017 01/17/2018 9841.59 31,668,200.0 0

Fluid Composition Data

Job Number Trade Name Supplier Purpose Ingredient Name CAS Number Additive Percentage by Mass Job Percentage by Mass Mass Used (lb)
1 Water Keane Group Carrier/Base Fluid Water 7732-18-5 100 87.7755 264,271,000.0
KWBO-2 Keane Group Breaker Listed Below
KAI-12 Keane Group Acid inhibitor Listed Below
Silver 7500 P.O.P. Silverback Chemical, LLC Friction reducer Listed Below
KWG-111L Keane Group Gelling agent Water 7732-18-5 50 0.0449576 135357
Water 7732-18-5 89.7 0.0142791 42990.9
Water 7732-18-5 15 0.000270752 815.171
Other Chemical(s) Listed Above See Trade Name(s) List Water 7732-18-5 89.7 0.0142791 42990.9
Water 7732-18-5 50 0.0449576 135357
Water 7732-18-5 15 0.000270752 815.171
KFR-23 Keane Group Friction reducer Listed Below
Sodium Hypochlorite Dirk Thomas Solutions Biocide Listed Below
Sodium hydroxide 1310-73-2 5 0.000795935 2396.37
Prop-2-yn-1-ol 107-19-7 5 0.00001739 52.357
Lubricating Oils (Petroleum), C20-50, Hydrotreated Neutral Oil-Based 72623-87-1 45 0.000812256 2445.51
Sodium hypochlorite 7681-52-9 16 0.00254699 7668.39
Methanol 67-56-1 30 0.00626107 18850.6
Sodium hypochlorite 7681-52-9 16 0.00254699 7668.39
Methanol 67-56-1 90 0.000313019 942.427
Copolymer of 2-propenamide 69418-26-4 20 0.017983 54142.7
Trade Secret Proprietary 1 0.00001805 54.345
Sodium hydroxide 1310-73-2 5 0.000795935 2396.37
Trade Secret Proprietary 5 0.00009025 271.724
Isoproyl alcohol 67-63-0 5 0.00001739 52.357
Distillates (petroleum), hydrotreated light 64742-47-8 20 0.017983 54142.7
Trade Secret Proprietary 40 0.000722006 2173.79
Trade Secret Proprietary 10 0.00008032 241.838
Trade Secret Proprietary 40 0.000722006 2173.79
Guar gum 9000-30-0 60 0.000481947 1451.03
Trade Secret Proprietary 15 0.000270752 815.171
Fatty imidazoline 61790-69-0 5 0.00001739 52.357
Trade Secret Proprietary 1 0.00001805 54.345
Silica Substrate 14808-60-7 100 11.8406 35,649,300.0
Guar gum 9000-30-0 60 0.000481947 1451.03
Solvent naphtha (petroleum) heavy aliph 64742-96-7 60 0.000481947 1451.03
Alcohols, C12-16, ethoxylated 68551-12-2 2 0.0017983 5414.27
Sodium persulfate 7775-27-1 99 0.00000789 23.76
Lubricating Oils (Petroleum), C20-50, Hydrotreated Neutral Oil-Based 72623-87-1 45 0.000812256 2445.51
Trade Secret Proprietary 5 0.00009025 271.724
Hydrochloric Acid 7647-01-0 15 0.0381373 114823
Trade Secret Proprietary 10 0.00008032 241.838
Alcohols, C7-9-iso-, C8-rich 68526-83-0 5 0.00001739 52.357
Trade Secret Proprietary 15 0.000270752 815.171
Solvent naphtha (petroleum) heavy aliph 64742-96-7 60 0.000481947 1451.03
Oleic acid diethanolamide 93-83-4 2 0.0017983 5414.27
Copolymer of 2-propenamide 69418-26-4 20 0.017983 54142.7
Distillates (petroleum), hydrotreated light 64742-47-8 20 0.017983 54142.7
Oleic acid diethanolamide 93-83-4 2 0.0017983 5414.27
Xylene 1330-20-7 5 0.00001739 52.357
Sodium persulfate 7775-27-1 99 0.00000789 23.76
Methanol 67-56-1 30 0.00626107 18850.6
Alcohols, C12-16, ethoxylated 68551-12-2 2 0.0017983 5414.27
Ethylbenzene 100-41-4 1 0.00000348 10.471
Sand (Proppant) Keane Group Proppant Listed Below
Hydrochloric Acid Keane Group Acidizing Listed Below
KSI-19 Keane Group Scale inhibitor Listed Below

For data sources see[4]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
2018 RICE DRILLING D LLC Brine 158802 225
2019 RICE DRILLING D LLC Brine 62383 90

For data sources see[5] [6]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
0406000554 2017-04-14 Casing String Witnessed No Violations On location to witness the cementing of the 20 surface casing. The rig drilled 24 hole to 564 and ran 547 of 20 casing to 544. O-tex Pumping cemented it with 825 sacks of Class H cement mixed at 15.6 ppg ( 15.4 ppg scale weight). There were 8 bbls of good cement returns to the surface and the pressure test of the casing passed. The floats held.
1012806133 2017-03-21 Casing String Witnessed No Violations
1043599773 2018-10-28 Production Wells No Violations Status check inspection found 5 wells on location all in the production flow back stages. All 5 wells were equipped to produce off the 5.5 production casing through 2 primary master valves with a single additional emergency shut down valve present in the production tree. All 5 wells are producing through sand trap separators with a production fluid temporary storage are set up on location consisting of (4) 500 barrel horizontal mobile tanks. Of the 5 wells present one annular pressure gauge is present and in order to indicate annular pressure monitoring is in place. No surface casing pressure relief devices are present on any of the 5 wells. During the last inspection on 08/27/2018 the DNR Inspector Ryan Armstrong noted to absence of proper well identification and on this day no well identification has been posted, also noted was the condition of the annular pressure gauges. Polymer containment is present around the well heads that the production flow back equipment is situated on, also present on the polymer containment is a diesel engine powered electrical light plant with no earthen ground present. Also present on location is a production facility consisting of (7) steel production tanks capable of holding 500 barrels fluid volume each. Multiple water trucks were present on location and in question to the destination of the produced water it was indicated they were hauling to the Goliath Well pad and staging at the Razing Kane.
1136423117 2018-12-13 Production Wells No Violations On site inspection accompanied by Division Hydrology and Engineering Staff along with Supervisors Brent Bear and Mark Atkinson. Also present was representatives with EQT and Rice Drilling. The purpose of the meeting was to discuss the fluid recover efforts on the well pad slope and well pad surface along with a remediation and stabilization plan moving forward. Currently 5 wells are present in production on the well pad. Since my last inspection the company has installed annular pressure monitoring on the well head A&B sections. The pressure is being monitored with electronic gauges attached to 2 diameter riser pipes. The riser pipes are tied into 2 diameter flow lines that are plumed into the production tanks. Also present at the well head is proper identification. The wells are still producing through a 3rd party contractor choke manifold and sand trap separator. The sand trap separators are being evacuated into (2) 500 barrel production tanks separate from the production facility. Additional production equipment on site is 5 gas processing units and a production fluid facility that consists of (7) 500 barrel vertical production tanks along with one horizontal 100 barrel tank, all situated inside a polymer lined steel containment dike area. The identification on the tank battery reflected EQT as the owner however the well head identification read Rice Drilling. The company was asked to address the identification issue. The well pad surface is of stone construction.
1493639179 2017-04-26 Plug / Plug Back No Violations On location to witness the plugging back of the vertical pilot hole (strat test). Halliburton Services spotted a 515 sack high density cement plug (17.5 ppg) from 10027 to 8860. The cement was spotted thru 3-1/2 fiberglass tubing, a BHKA tool and drill pipe. The BHKA tool sheared at 2400 psig leaving the tool and the fiberglass tubing in the cement and a foam ball was dropped to circulate out any cement remaining in the drill pipe.
1848225432 2018-11-06 Production Wells No Violations On site inspection accompanied by ODNR Inspector Ryan Armstrong along with Supervisors Brent Bear and Mark Atkinson. The purpose of the inspection was to review the water being recovered from the North outward slope of the well pad. It was observed that a 3rd party contractor was on site with portable pumps set up at 4 locations recovering surface fluid from both on and off the well pad, the fluid was being stored in (2) steel construction 500 barrel capacity portable tanks situated on the well pad. I titrate tested the fluid found present in the recovery station points directly on the North side of the well pad at 3 different locations and found no chlorides over 496 parts per million. Addressing the well head assembly, the well is equipped with a lower A and upper B section with no pressure gauges manual or electronic visible on either well head section service outlet ports. There are (2) 7.0625 diameter completion valves install horizontally in line with each other atop the well head B section. Down stream from the master valves is an emergency shut down device. The well is being produced through temporary installed sand trap separators before the product enters the sales line point next to the well head. A gauge present on the well head assembly indicated 3,800 pound pressure on the 5.5 diameter casing. The well was producing off the 5.5 casing.
1874137293 2019-03-19 Preliminary Restoration No Violations Preliminary Restoration status check inspection accompanied by ODNR Engineer Tech Anthony Carson found that the area affected by the well pad construction stable with vegetation established and erosion control in place. There is a area of the well pad that has fluid being recovered on the outward slope. To date 11 monitoring wells have been installed on the well pad surface and a 3rd party contract company identified as SE Technologies is on site sampling fluid from the monitoring wells. The employee from SE identified as Steve Gerritsen indicated he would be on site the next 2 days sampling. The Preliminary Restoration will be addressed once the area disturbed by the fluid recover is remediated and all fluid recovery has ceased. Addressing the wells. 5 wells are present on the pad and in production. All have annular pressure monitoring in place. The annular pressure is being monitored by the means of electronic transducers installed on the riser pipes attached to the well head A&B sections. The riser pipes are plumbed into a sales line that is fitted with a choke valve.
2082480418 2018-08-27 Production Wells No Violations On the day of my inspection I witnessed that the well was currently in flowback operations with 2 flowback sand traps, and a choke manifold, the sand traps were tied directly to the production fluid tanks. The well appeared to have gauges monitoring annular pressure but at the time of my inspection I was unable to read them. Production equipment included an additional sand trap, an individual Gas Processing unit and 6- 500-barrel production fluid tanks, and a 100-barrel production fluid tank that was tied directly into the production sand trap all tanks were shared with the other producing wells on the pad. The well pad and all equipment were within earthen containment with secondary containment around the production tanks. There was also a small excavator on location that had replaced a well pad drain. There were multiple Emergency Shutoff Devices on location, Identification tag were not present, and production was current.

For data sources see[7]

References

  1. ↑ "Risk Based Data Management System - Well, tblLocational, tblPlugWell, tblInspection, tblCivilTownships and tblPad Tables". Ohio Department of Natural Resources. 2019-05-07. Retrieved 2019-05-21. 
  2. ↑ "Risk Based Data Management System - Well and WellHistry Tables". Ohio Department of Natural Resources. 2019-05-07. Retrieved 2019-05-21. 
  3. ↑ "Risk Based Data Management System - Perfs Table". Ohio Department of Natural Resources. 2019-05-07. Retrieved 2019-05-21. 
  4. ↑ "FracFocus Fracking Chemicals Database". 2019-04-02. Retrieved 2019-06-19. 
  5. ↑ "Risk Based Data Management System - Production Table - Brine Data". Ohio Department of Natural Resources. 2019-05-07. Retrieved 2019-05-21. 
  6. ↑ "Combined Production - Brine Data". Ohio Department of Natural Resources. 2019-05-07. Retrieved 2019-05-21. 
  7. ↑ "Risk Based Data Management System - tblInspection, tblInspFail and tblinspFlDesc Tables". Ohio Department of Natural Resources. 2019-05-07. Retrieved 2019-05-21. 
Retrieved from "https://www.wellwiki.org/index.php?title=34-013-21143&oldid=7293177"