X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-051-20092

Well Details

Well ID: 34-051-20092
Loading map...
Country: United States
State: Ohio
County: Fulton
Municipality: German Township
Operator Name: DON YOHE ENTERPRISES INC.
Well Pad ID:
Farm/Lease Name: WYSE & BLOSSER (SWIW #2)
License Status: Final Restoration
License Date: 2014-01-10
Spud Date: 1996-06-28
Spud Drilling Contractor: BIGARD DRILLING
Final Drill Date: 1996-07-04
Well Total Depth: 1337.00 ft
Configuration: Vertical
Latitude: 41.550000
Longitude: -84.230000

For data sources see[1]

Well History

Well Status Well Status Date Comment
CO 1996-05-20 5175 HEAT CONTROLLER INC GeoDate 5/20/96
Oil and Gas 1996-05-20 Issued Date 5/20/96 Expired Date 5/20/97 Acres 0020000 Tool Type RTAF Proposed Formation NIAGARAN-MT. SIMON Proposed Depth 01337 Proposed Drill Depth 01337
Original Spud 1996-06-28 DRILLED AS SWIW CONVERT 10-12-90. WELL P & A ON MARCH 14, 2014 - TET
Completed 1996-07-04 DRILLED AS SWIW CONVERT 10-12-90. WELL P & A ON MARCH 14, 2014 - TET
Reached Total Depth 1996-07-04 DRILLED AS SWIW CONVERT 10-12-90. WELL P & A ON MARCH 14, 2014 - TET
Completion Report Received 1996-09-03 DRILLED AS SWIW CONVERT 10-12-90. WELL P & A ON MARCH 14, 2014 - TET
CO 1996-10-08 5175 HEAT CONTROLLER INC GeoDate 10/8/96
Conversion to Injector 1996-10-08
Salt Water Injection Well 1996-10-08 Issued Date 10/8/96 Expired Date 10/8/97 Acres 0000000 Tool Type RTF Proposed Formation NIAGARAN Proposed Depth Proposed Drill Depth
Storage Well 1996-10-08 Issued Date 10/8/96 Expired Date 10/8/97 Acres 0000000 Tool Type RTF Proposed Formation NIAGARAN Proposed Depth Proposed Drill Depth
Annulus Pressure Monitoring Approved 1996-10-26 DRILLED AS SWIW CONVERT 10-12-90. WELL P & A ON MARCH 14, 2014 - TET
First Injection 1996-11-28 DRILLED AS SWIW CONVERT 10-12-90. WELL P & A ON MARCH 14, 2014 - TET
Change of Owner 1997-09-02 Operator changed from 5175, HEAT CONTROLLER INC to 5922, YOHE DON ENTERPRISES INC.
APP 2014-01-10 Proposed Formations:CLINTON, Issued Date:1/10/2014, Expired Date:1/10/2016 12:00:00 PM, Drilling unit acres:0, Proposed Well Type:SWD, Proposed Well Class:SWIW
Plugged/Abandoned 2014-03-14 DRILLED AS SWIW CONVERT 10-12-90. WELL P & A ON MARCH 14, 2014 - TET
Last Compliance Report 2014-04-01 DRILLED AS SWIW CONVERT 10-12-90. WELL P & A ON MARCH 14, 2014 - TET
Construction Permit Expires 2016-01-10 DRILLED AS SWIW CONVERT 10-12-90. WELL P & A ON MARCH 14, 2014 - TET
Record Last Modified 2017-02-10 DRILLED AS SWIW CONVERT 10-12-90. WELL P & A ON MARCH 14, 2014 - TET

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2000-04-28 1176 1238 4
2006-09-11 1212 1222 40
1176 1238 4
1212 1222 40
1176 1238 4
2006-09-11 1228 1238 40

For data sources see[3]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
ACID 28 500 Gal 0 TREATED W/500 GAL 28% HCL

For data sources see[4]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
1998 DON YOHE ENTERPRISES INC. 4530.00 0.00 326
2012 DON YOHE ENTERPRISES INC. 0.00 0.00 0

For data sources see[5] [6]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
1998 DON YOHE ENTERPRISES INC. Brine 71075 326
2012 DON YOHE ENTERPRISES INC. Brine 0 0

For data sources see[7] [8]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1119555747 2014-3-12 0:00: AM No Violations
-1166794598 2005-12-27 0:00 SW No Violations
-1579349966 2010-8-19 0:00: SW No Violations
-1697060252 2013-7-17 0:00: SW No Violations
-1784198531 2010-11-17 0:00 SW No Violations
-1813037877 2012-12-13 0:00 SW No Violations
-1928539068 2014-2-21 0:00: AM No Violations
-473117652 2014-9-15 0:00: FR No Violations
-538424949 2011-10-4 0:00: SW No Violations
-787175536 2010-3-4 0:00:0 SW No Violations
-992992069 2013-11-6 0:00: SW No Violations
0007073514 2001-08-23 Salt Water Injection Well No Violations Chk well and storage. Injection pump is not running at this time. OK
0010873548 2001-10-15 Salt Water Injection Well No Violations Chk well and storage. Injection pump not running at this time. Vac/5psi OK
0013373565 2001-12-21 Salt Water Injection Well No Violations Chk well and storage OK. The injection pump is not running at this time.
0018373614 2002-02-04 Salt Water Injection Well No Violations Chk well and storage, OK.
0027373672 2002-06-19 Salt Water Injection Well No Violations Chk well and storage, OK. No fluid in dike at this time.
0197973634 2011-06-28 Salt Water Injection Well No Violations Inspect well. Well shut in. site ok. Conducted 15 minute mini test. Pressured up to 80 psi, no change at 5 minutes and 15 minutes.
0473117652 2014-09-15 Final Restoration No Violations At the time of the inspection all restoration work has been completed and the well location is being farmed. The Pole building with concrete pads, a 300 barrel steel tank, a 100 barrel steel tank, all secondary containment under the steel tanks, all PVC valve boxes, the water well, and the access road to the site from County Road F were left at the request of the landowner. The Landowner Waiver was received and the Final Restoration Passed.
0538424949 2011-10-04 Salt Water Injection Well No Violations Inspect well. Well shut in.
0722407507 2012-06-12 Salt Water Injection Well No Violations Inspect Well. Well is shut in.
0787175536 2010-03-04 Salt Water Injection Well No Violations Well field on temporary shut down until 5/31/10. Called Jim Hoops and left message to remind to test well 1 per month with 200 psi for 15 minutes. Loss of pressure must not exceed 5%. Keep records of testing.
0992992069 2013-11-06 Salt Water Injection Well No Violations Inspect well for integrity and pressure. Well is shut in. The farmer ripped the area immediately arround the builing, tanks, and well. He also ripped up the access road that lead to the well head.
1046717986 2003-03-03 Salt Water Injection Well Violations Noted Gauge for injection pressure has 1/2 inch fitting. Permit requires 1/4 inch fitting to test pressure. Annulus pressure was at 0 (zero). Spoke to operator, Don Yohe by phone. He thought that pressure was being kept on annulus as approved in permit. A 1/4 inch fitting will be added to the injection pressure side. Either keep a positive pressure on the annulus side or else check the annulus pressure once per month with at least 200 psi for at least 15 minutes. Containment dike for tank battery has rubber liner and appears to be in good condition. Sign posted at tank battery. Inspection with Jeff Fry.
1051113410 2003-04-23 Salt Water Injection Well Violations Noted The injection pressure valve still has a 1/2 inch fitting with a gauge that is spiked as previously inspected. The operators valve on the annulus side shows no pressure with the valves open. Could not open the valve on the opposite side of the operators gauge on the annulus side to check pressure to compare with operators gauge. A 1/4 inch fitting must be fitted to the injection pressure side and the valves and plug on the annulus side should be in good working order for pressure testing by the inspector.
1057157236 2003-07-02 Salt Water Injection Well No Violations Operator has installed new gauges on well. Gauges on well attach with 1/4 inch fittings which are compatable with the inspectors gauge. Check of annulus pressure showed 60 psi on both inspector and operator gauge. There was no pressure on the injection side with the inspector and operator gauge. Removal of gauges and shut off valves were in good working condition. Thank you for your cooperation. Notice of Violation is terminated.
1065550314 2003-10-07 Salt Water Injection Well No Violations Checked pressure on well. Pressure on annulus side has dropped from 60 psi to 20 psi. May need to increase pressure on annulus side before it goes to 0 psi. There was no pressure on the injection side. Rubber lined containment pit in good condition.
1072122390 2003-12-18 Salt Water Injection Well No Violations Checked pressure of well. Pressure was 0 on annulus and injection side. Operator Jim Hoops arrived on site after pressure check. He explained that well seems to hold pressure in warm weather but in cold weather pressure will not hold over a few days. He put approximately 40 psi on annulus side during inspection. Pressure held for at least 15 minutes. He said there would be 0 pressure by next morning. Called Jeff Fry. Jeff indicated that there was no violation.
1077817737 2004-02-26 Salt Water Injection Well No Violations There was no pressure on annulus or injection side. This is same situation as last inspection. Temperature has been below freezing. As noted in last inspection, pressure does not hold in these conditions. Will contact operator Jim Hoops to discuss situation.
1084386225 2004-05-12 Salt Water Injection Well No Violations There was approximately 48 pounds of pressure on the annulus side and 0 pounds on the injection side. It appeared as though water was being pumped into the well since the pipes were sweating. Containment dike around tank battery in good condition.
10873548 2001-10-15 0:00 SW No Violations
1089906610 2004-07-15 Salt Water Injection Well No Violations ID sign posted. Containment dike in good condition. Approximately 105 psi on annulus side, 0 psi on injection side
1095944422 2004-09-23 Salt Water Injection Well No Violations Sign posted. Containment dike in good condition. Annulus pressure 78 psi. Injection pressure 0.
1104933554 2005-01-05 Salt Water Injection Well No Violations Sign posted. Dike in good condition. No pressure on annulus or injection side. This is similar to conditions in previous cold weather. Well holds pressure in warm weather. Called operator Jim Hoops who came to well and used air compressor to add presure to annulus side. Annulus pressure was pumped to 60 psi. Pressure held over period of 15 minutes. Discussed monthly testing requirement of 200psi for 15 minutes. Data needs to be recorded on annual report
1112190316 2005-03-30 Salt Water Injection Well No Violations Checked injection well pressure. There was 10 psi on the annulus side and 0 psi on the injection side. Liner for dike around tank battery in good condition.
1118951466 2005-06-16 Salt Water Injection Well No Violations Sign posted. Liner for tank battery in good condition. Pressure on injection side 0 psi and annulus pressure 40 psi.
1119555747 2014-03-12 Administrative Inspection No Violations I received a call from Brad Yohe, Field Supervisor for Yohe Enterprises, who indicating they had set up on the well and cleaned out the debris on top of the cement retainer. They were then able to sting into the retainer and pump water at 1000 psi into the formation indicating the retainer was working correctly. They are planning on cementing the well on 3-14-14.
1126551428 2005-09-12 Salt Water Injection Well No Violations Checked injection well. Approximately 80 psi on annulus side and no pressure on injection side. Drilling contractor Bob Heuer on site pumping water from water well into tank truck. Will be drilling new well on nearby property tomorrow.
1142883484 2006-03-20 Salt Water Injection Well No Violations There was only about a 5 psi difference in pressure between the annulus (30 psi) and injection (25 psi). Called local operator Jim Hoops and left message to check well to be sure there is a continued difference in pressure between the anulus and injection sides.
1149190809 2006-06-01 Salt Water Injection Well No Violations Water could be heard dripping into injection side of well. Pipes were sweaty due to warm outdoor temperature. There was no pressure on the injection side. The annulus side had 30 psi. Liner for storage tank in good condition. Permit sign posted.
1155584337 2006-08-14 Salt Water Injection Well No Violations ID sign posted. Annulus pressure 0 psi, injection pressure 60 psi. Pit for tanks in good condition.
1166794598 2005-12-27 Salt Water Injection Well No Violations Berm and liner for tank battery appear to be in good condition. ID sign posted. Injection pressure 25 psi, annulus pressure 0.
1168437608 2007-01-09 Salt Water Injection Well No Violations ID sign posted. Berm around tank battery in good condition. Injection pressure 0, annulus pressure 25 psi.
1174399193 2008-05-19 Salt Water Injection Well No Violations Spoke to operator Jim Hoops on site. Gauges on injection well are corroded. Injection pressure indicates 20 psi and 0 on annulus. Jim has new gauges on order.
1175179605 2007-03-29 Salt Water Injection Well No Violations Sign posted a wellhead. Containment structure for tank battery in good condition. No pressure on injection side of well and 5 psi on annulus side.
1185822033 2007-07-30 Salt Water Injection Well No Violations Checked injection well. No pressure on injection side and 75 psi on the annulus side. Sign posted. Dike for tank battery in good condition.
1191517607 2007-10-04 Salt Water Injection Well No Violations Sign posted Pit for tank battery in good condition. Annulus pressure 45 psi. No injection pressure.
1202244945 2008-02-05 Salt Water Injection Well No Violations Sign posted at well. Liner in pit for tank battery in good condition. Annulus has 30 psi with 0 psi on injection. Annulus gauge is rusting and should be replaced.
1218559757 2008-08-12 Salt Water Injection Well No Violations Operator has replaced gauges on well. No injection pressure. Annulus pressure 94 psi. Rubber lined pit for tank battery appears to be in good condition.
1227647127 2008-11-25 Salt Water Injection Well No Violations Checked pressure on well. Annulus pressure 25 psi and no injection pressure. Liner for tank battery in good condition.
1237081036 2012-09-19 Salt Water Injection Well No Violations At the time of my inspection the well was shut in and not in operation. There was no power to the meter so no meter reading was available.
1238589985 2009-03-26 Salt Water Injection Well No Violations Checked well. ID sign posted. Annulus pressure 10 psi and 0 injection pressure. Gauges in good condition.
1247163827 2009-07-09 Salt Water Injection Well No Violations Written request submitted to temporarily shut down gas and injection well. There was no pressure on the annular or injection sides of the well. Called Jim Hoops to check what testing is being done on injection well. Left message to call inspector. ID sign posted. Pit liner for storage tanks in good condition.
1254939897 2009-10-07 Salt Water Injection Well No Violations No pressure on the annular or injection side of the well. Spoke to Jim Hoops after last inspection 7/9/09 about requirements to maintain integrity during shutdown time. Operator requested 6 month temporary shutdown in April 2009. Spoke to Jodi Hansen of Yohe Enterprises by phone 10/8/09. They are currently discussing returning well field to operation. She will contact Mike McCormac if additional time for temporary shutdown is needed. Returning to operation will be dependent of natural gas prices.
1301927908 2011-03-29 Salt Water Injection Well No Violations Inspected well. Well shut in. Contacted operator by phone to request test and pressure annulus verify integrity.
13373565 2001-12-21 0:00 SW No Violations
1365108014 2013-04-03 Salt Water Injection Well No Violations At the time of the inspection the well was shut in.
1392917273 2014-02-20 Administrative Inspection No Violations Contacted by Luanne Korte an independent contractor representing Yohe Enterprise. There were communication requirement misunderstandings by the contractor that have been identified and resolved. The operator attempted and failed to plug the well on February 12, 2014. During site activities the operator has set a cement retainer at a depth of 1050 feet. Then attempted to pump fluid below the retainer and failed. The well is believed to have an obstruction in the retainer port hole; the operator intends to use a probe attached to 2 3/8 inch tubing to run a probe on the base of 2 3/8 to circulate this obstruction from the retainer port hole and another attempt to plug out this well will be made. The operator was advised to contact the inspector prior to the phase 2 work currently scheduled for March 3, 2014.
1394719958 2014-03-10 Plug / Plug Back No Violations At the time of the inspection the plugging contractor was setting up to attempt to clean out the debris from above the cement retainer set at 1050 on 2-7-14. This will be done using a probe and 2 3/8 tubing to try to flush out any obstructions above the retainer. An attempt to plug the well on 2-12-14 was unsuccessful due to issues getting to the retainer.
1394814333 2014-03-14 Plug / Plug Back No Violations A cement retainer was set at 1050 inside the 5.5 casing on 2-7-2014 and plugging was attempted on 2-12-14. Debris in the wellbore had fallen down on top of the retainer and did not allow fluids to pass through. On 3-12-14, the debris was flushed clean using 2 3/8 tubing and water was then pumped below the retainer to verify it was functioning correctly. The well was cemented through the 5.5 casing to surface on 3-14-2014. Target Oilfield Tools was the Plugging Contractor. See Plug Report for details.
1579349966 2010-08-19 Salt Water Injection Well No Violations Check well and storage, has positive pressure on the annulus but not enough to measure.
1618604884 2013-01-29 Salt Water Injection Well No Violations At the time of my inspection there were several trucks and other equipment blocking the lane back to the injection facility. The equipment belongs to a construction company building a home across the street. There was nobody available to move the equipment and ther is no other access lane to the well.
1697060252 2013-07-17 Salt Water Injection Well No Violations Inspect well for integrity and pressure. Well is shut in.
1784198531 2010-11-17 Salt Water Injection Well No Violations Has positive pressure on annulus but not enough to measure.

Has identification posted. Liner in diked area is in good condition at this time. Very little fluid in diked area at this time. Site is over grown with weeds, showing signs of none use.

1785512212 2012-02-09 Salt Water Injection Well No Violations Inspect Well. Shut in.
1813037877 2012-12-13 Salt Water Injection Well No Violations At the time of my inspection the well was shut in with 0 psi on both the injection tubing and the annulus.
18373614 2002-2-4 0:00:0 SW No Violations
1928539068 2014-02-21 Administrative Inspection No Violations Brad Yohe of Don Yohe Enterprises Inc. called to report that the Cement retainer installed previously had an obstruction and did not allow circulation of the well. He is has scheduled for March 3, 2014 to run tubing into the well and sting into the cement retainer to attempt to clear the obstruction. Then cement will be ordered for plugging the well.
197973634 2011-6-28 0:00: SW No Violations
27373672 2002-6-19 0:00: SW No Violations
7073514 2001-8-23 0:00: SW No Violations
722407507 2012-6-12 0:00: SW No Violations

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
1046717986 US-OH-100736 2003-03-03 Violation of injection tubing/fitting requirements
1046717986 US-OH-100737 2003-03-03 Failure to monitor annulus pressure
1051113410 US-OH-100852 2003-05-05 Violation of injection tubing/fitting requirements
1051113410 US-OH-100853 2003-05-05 Failure to monitor annulus pressure

For data sources see[9]

References

  1. ↑ "Risk Based Data Management System - Well, tblLocational, tblPlugWell, tblInspection, tblCivilTownships and tblPad Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  2. ↑ "Risk Based Data Management System - Well and WellHistry Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  3. ↑ "Risk Based Data Management System - Perfs Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  4. ↑ "Risk Based Data Management System - tblStimulation Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  5. ↑ "Risk Based Data Management System - Production Table - Oil and Gas Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  6. ↑ "Combined Production - Oil and Gas Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  7. ↑ "Risk Based Data Management System - Production Table - Brine Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  8. ↑ "Combined Production - Brine Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  9. ↑ "Risk Based Data Management System - tblInspection, tblInspFail and tblinspFlDesc Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
Retrieved from "https://www.wellwiki.org/index.php?title=34-051-20092&oldid=14221784"