X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-029-20573

Well Details

Well ID: 34-029-20573
Loading map...
Country: United States
State: Ohio
County: Columbiana
Municipality: Knox Township
Operator Name: MILE BRANCH GRANGE #933
Well Pad ID:
Farm/Lease Name: MILES BRANCH GRANGE UNIT
License Status: Producing
License Date: 1966-10-19
Spud Date: 1966-11-24
Spud Drilling Contractor: ARMSTRONG DRLG
Final Drill Date: 1967-02-04
Well Total Depth: 5280.00 ft
Configuration: Vertical
Latitude: 40.890000
Longitude: -81.030000

For data sources see[1]

Well History

Well Status Well Status Date Comment
Original Spud 1966-11-24
Completed 1967-02-04
Reached Total Depth 1967-02-04
CO 1985-10-22 2317 MILE BRANCH GRANGE
Record Last Modified 2017-02-15

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2006-09-11 0 15
0 15
0 15

For data sources see[3]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
H2O 0 0 53000
H2O 0 0 53000
GEL 0 200 Lbs 0 AGENT & 40 GAL ADOMALL.

For data sources see[4]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
1997 MILE BRANCH GRANGE #933 3639.00 96.00 0
2001 MILE BRANCH GRANGE #933 1681.00 0.00 365
2002 MILE BRANCH GRANGE #933 1557.00 80.00 365
2006 MILE BRANCH GRANGE #933 1524.00 0.00 365
2007 MILE BRANCH GRANGE #933 804.00 83.00 300
2008 MILE BRANCH GRANGE #933 930.00 0.00 365
2009 MILE BRANCH GRANGE #933 773.00 98.00 365
2010 MILE BRANCH GRANGE #933 1066.00 63.00 365
2014 MILE BRANCH GRANGE #933 863.00 0.00 365
2015 MILE BRANCH GRANGE #933 814.00 53.00 365
2016 MILE BRANCH GRANGE #933 1181.00 57.00 365
2017 MILE BRANCH GRANGE #933 1040.00 0.00 365

For data sources see[5] [6]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
1997 MILE BRANCH GRANGE #933 Brine 0
2001 MILE BRANCH GRANGE #933 Brine 0 365
2002 MILE BRANCH GRANGE #933 Brine 0 365
2006 MILE BRANCH GRANGE #933 Brine 0 365
2007 MILE BRANCH GRANGE #933 Brine 0 300
2008 MILE BRANCH GRANGE #933 Brine 0 365
2009 MILE BRANCH GRANGE #933 Brine 0 365
2010 MILE BRANCH GRANGE #933 Brine 0 365
2014 MILE BRANCH GRANGE #933 Brine 0 365
2015 MILE BRANCH GRANGE #933 Brine 0 365
2016 MILE BRANCH GRANGE #933 Brine 0 365
2017 MILE BRANCH GRANGE #933 Brine 0 365

For data sources see[7] [8]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-236458774 2017-9-20 0:00: PW No Violations 1.00
-532121144 2017-10-16 0:00 PW No Violations 0.70
0236458774 2017-09-20 Production Wells Violations Noted The purpose of my inspection was to conduct a status check on well #2-0573. The lease road to the well remained in good repair. A review of RBDMS indicated the Owner was current with reporting production. The well and production equipment were situated inside a chain link fence. The base of the location was lined with crushed gravel. No identification was present at the well head. The 8.625 well head was below grade. The 4.5 production casing was equipped with a plunger lift assembly. The base of the plunger catch tube was leaking production fluid and gas. Live production fluid was present on the well head assembly and staining the ground. The fluid was not mobile. The condition of the well head indicated the leak was not recent. I also observed the hammer union on the lower U-tube assembly to be leaking production fluid onto the ground. Production equipment inside the fence consisted of one (1) vertical separator and one (1) 100 bbl production tank. No identification was present on the separator. No earthen dike was present around the separator or production tank. I observed residual leaking from a hammer union on the flow line leading to the separator that was staining the ground. I observed residual leaking from the separator dump valve and pressure supply drip supply lines. The leaking was not live or mobile. No fluid was collecting on the ground. No identification was present on the production tank. The tank body remained in good repair. I observed evidence of overfilling of the tank that was staining the side of the tank and on the ground adjacent to the tank. Valves were closed and plugged. Operation of well #2-0573 was causing pollution and contamination in violation of Ohio Revised Code 1509.22(A) and Ohio Administrative Code 1501:9-1-07. The well head assembly was insufficiently equipped to prevent the escape of oil and gas in violation of Ohio Revised Code 1509.20 and Ohio Administrative Code 1501:9-9-05(A)(1). The Operator failed
0532121144 2017-10-16 Production Wells No Violations The purpose of my inspection was to follow up on compliance notice #236458774. I received a phone call from Mr. Don Bandy, who is the operator of well #2-0573. Mr. Bandy stated that he had repaired the well head leak and cleaned the adjacent area up. He continued that the flow line unions and valves were tightened to prevent further leaking. Correct identification was posted on the production tank stairs. Mr. Bandy requested that the earthen dike requirement be reconsidered due to the lack of a clear and present hazard and the financial status of the well owner, Mile Branch Grange. The well and production equipment was located over 2800 feet from the nearest surface water source as measured on the ODNR-DOGRM oil and gas well locator. Topography was flat. The location was also located away from the nearest public roadway. The location lacks a clear and present hazard therefore the earthen dike requirement was waived. At the time of my follow-up inspection the well head leaks had been repaired and free product cleaned from the well head. Contaminated material around the well head was removed and new gravel applied. No further action was necessary.

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
0236458774 US-OH-122359 2017-11-27 9-1-07 Well operation causing pollution and contamination
0236458774 US-OH-122360 2017-11-27 9-9-05(A)1 Well insufficiently equipped to prevent escape of oil and gas
0236458774 US-OH-122361 2017-11-27 9-9-05(A)10 Failure to legibly identify well
0236458774 US-OH-122362 2017-11-27 9-9-05(A)9 No SPCC dike/or failure to keep dike free of water or oil

For data sources see[9]

References

  1. ↑ "Risk Based Data Management System - Well, tblLocational, tblPlugWell, tblInspection, tblCivilTownships and tblPad Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  2. ↑ "Risk Based Data Management System - Well and WellHistry Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  3. ↑ "Risk Based Data Management System - Perfs Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  4. ↑ "Risk Based Data Management System - tblStimulation Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  5. ↑ "Risk Based Data Management System - Production Table - Oil and Gas Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  6. ↑ "Combined Production - Oil and Gas Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  7. ↑ "Risk Based Data Management System - Production Table - Brine Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  8. ↑ "Combined Production - Brine Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  9. ↑ "Risk Based Data Management System - tblInspection, tblInspFail and tblinspFlDesc Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
Retrieved from "https://wellwiki.org/index.php?title=34-029-20573&oldid=14049248"