X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-111-24551

Well Details

Well ID: 34-111-24551
Loading map...
Country: United States
State: Ohio
County: Monroe
Municipality: Seneca Township
Operator Name: ANTERO RESOURCES CORPORATION
Well Pad ID: US-OH-001145
Farm/Lease Name: KURTZ UNIT
License Status: Producing
License Date: 2015-10-14
Spud Date: 2014-11-29
Spud Drilling Contractor: PATTERSON DRILLING
Final Drill Date: 2015-07-29
Well Total Depth: 18759.00 ft
Configuration: Horizontal
Latitude: 39.830000
Longitude: -81.250000

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2014-11-25 Proposed Formations:POINT PLEASANT, Issued Date:11/25/2014, Expired Date:11/24/2016 12:00:00 PM, Drilling unit acres:0, Proposed Well Type:ST, Proposed Well Class:STRT
APP 2015-03-25 Proposed Formations:POINT PLEASANT, Issued Date:3/25/2015, Expired Date:3/24/2017 12:00:00 PM, Drilling unit acres:536.741, Proposed Well Type:OG, Proposed Well Class:POOL
Reached Total Depth 2015-07-29
APP 2015-10-14 Proposed Formations:POINT PLEASANT, Issued Date:10/14/2015, Expired Date:10/13/2017 12:00:00 PM, Drilling unit acres:546.89, Proposed Well Type:OG, Proposed Well Class:POOL
Completion Report Received 2016-04-25
Construction Permit Expires 2017-10-13
Record Last Modified 2017-10-23

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2016-04-25 8879 18636 0
8879 18636 0
8879 18636 0

For data sources see[3]

Fracking Activities

Fracking Jobs

Job Number Job Start Date Job End Date True Vertical Depth (ft) Total Water Volume (gal) Total Non-Water Volume (gal)
1 11/18/2015 01/05/2016 8562 14,766,600.0 0

Fluid Composition Data

Job Number Trade Name Supplier Purpose Ingredient Name CAS Number Additive Percentage by Mass Job Percentage by Mass Mass Used (lb)
1 Sand, White Baker Hughes Proppant Listed with Other Ingredients NA 0 9.63207 0
Alpha 1427 Baker Hughes Biocide Listed with Other Ingredients NA 0 0.0044061 0
HCl, 20.1 - 28% Baker Hughes Acidizing Listed with Other Ingredients NA 0 0.194074 0
Water Operator Carrier Water 7732-18-5 100 90.0102 123,121,000.0
GW-3 Baker Hughes Gelling Agent Listed with Other Ingredients NA 0 0.054948 0
Other Chemicals Potassium Chloride 7447-40-7 0 0.000165777 226.759
Didecyl Dimethyl Ammonium Chloride 7173-51-5 0 0.000881219 1205.38
Sodium Chloride 7647-14-5 0 0.003616 4946.44
Hemicellulase Enzyme Concentrate 9025-56-3 0 0.00007985 109.225
Ethanol 64-17-5 0 0.00044061 602.691
Ethylene Glycol 107-21-1 0 0.00497331 6802.78
Hydrochloric Acid 7647-01-0 0 0.0543408 74330.4
Ethoxylated Alcohol 68551-12-2 0 0.00138017 1887.87
Petroleum Distillates 64742-47-8 0 0.0207025 28318.1
Ammonium Chloride 12125-02-9 0 0.00207025 2831.81
Guar Gum 9000-30-0 0 0.054948 75161
Calcium Chloride 10043-52-4 0 0.000936 1280.79
Poly (acrylamide-co-acrylic acid) partial sodium salt 62649-23-4 0 0.0207025 28318.1
Crystalline Silica (Quartz) 14808-60-7 0 9.63207 13,175,300.0
Glutaraldehyde 111-30-8 0 0.00264366 3616.14
Quaternary Ammonium Compound 68424-85-1 0 0.00044061 602.691
Polyoxythylene Sorbitan Monooleate 9005-65-6 0 0.000345042 471.968
Oleamide DEA 93-83-4 0 0.00138017 1887.87
Enzyme G-NE Baker Hughes Breaker Listed with Other Ingredients NA 0 0.00159703 0
FRW-18 Baker Hughes Friction Reducer Listed with Other Ingredients NA 0 0.0207025 0
Calcium Chloride Baker Hughes Salts Listed with Other Ingredients NA 0 0.011 0

For data sources see[4]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
2015-12-20 H2O 15 0 235933 BAKER-HUGHES STAGE 1/56

30 SHOTS STAGES 2-55 SEE IMAGES

2016-01-05 H2O 15 0 237964 BAKER-HUGHES STAGE 56/56

30 SHOTS

For data sources see[5]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
2016 ANTERO RESOURCES CORPORATION 3465008 570 292
2017 ANTERO RESOURCES CORPORATION 1418000 275 364
2018 ANTERO RESOURCES CORPORATION 747903 304 363
2019 ANTERO RESOURCES CORPORATION 142036 108 90

For data sources see[6] [7]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
2016 ANTERO RESOURCES CORPORATION Brine 33088 292
2017 ANTERO RESOURCES CORPORATION Brine 10656 364
2018 ANTERO RESOURCES CORPORATION Brine 6662 363
2019 ANTERO RESOURCES CORPORATION Brine 1359 90

For data sources see[8] [9]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1236968512 2015-1-14 0:00: CS No Violations 4.00
-1270468778 2017-8-25 0:00: PL No Violations 0.50
-1511069585 2018-3-7 0:00:0 PW No Violations 0.50
-20688406 2016-2-2 0:00:0 PW No Violations 0.50
-22578775 2019-1-24 0:00: PW No Violations 0.20
-593089014 2016-1-4 0:00:0 CT No Violations 2.00
0020688406 2016-02-02 Production Wells No Violations Status check inspection to document the well bore annular pressures. The 5.5x 9 showed 39 psi, the 9x 13 showed 191 psi. The company is preparing to put the well back on line in the next 12 hours.
0022578775 2019-01-24 Production Wells No Violations On this day, I found the pad gated with signage at the entrance. There are (5) producing wells, (1) additional well that has had only the conductor drilled and set, (5) gas processing units (GPU), (8) 400-barrel steel production tanks within polymer lined steel containment, and an Emergency Shutdown (ESD) button is present at the pad entrance. Additionally, concrete barriers surround the perimeter of the wellheads. Identification and annular pressure monitoring devices are present. The 9.625 inch diameter intermediate casing has a pressure of 2,200 pounds per square inch (psi), and the 13.375 inch diameter surface casing has a pressure of 20 psi. I contacted Doug Stebbins with Antero Resources, to notify him of the pressure.
0070657903 2015-11-09 Preliminary Restoration No Violations Preliminary Restoration status check inspection fount the area affected by the well pad construction has been restored with proper erosion and vegetation control in place. Addressing the well status-the drilling process is now complete and the well is awaiting stimulation. A total of 8-400 barrel production tanks are in place inside a poly lined metal containment dike area. A total of 5 gas process separation units are in place to support each of the 5 existing wells on the pad.
0373887263 2015-01-13 Drill / Deepen / Reopen No Violations My inspection today finds Dallas Morris Rig 24 is drilling 24 borehole at a depth of 151. The anticipated total depth is 395.
0593089014 2016-01-04 Completion Testing No Violations Status check inspection on the well stimulation process found Baker & Hughes stimulation service currently stimulating stage 53 of 56 total stages to be completed with Horizontal Wireline Service on location conducting the perforating for this stage with 60 shots in 6 clusters of 10 shots administered on this stage between the depths of 9,349 and 9,498 with a solid completion plug set first at 9,512. The 5.5 production casing annular pressure is being monitored electronically during stimulation.
0693015416 2014-11-30 Casing String Witnessed No Violations The said well was spudded on 11/29/14 by Express Energys top hole rig with a 100 x 32 conductor borehole being drilled with the fresh water strata encountered at 76. 11/30/14-100 of 26 weld connection conductor was set and cemented by Express Energys cement service using 330 sacks of class A 2% calcium .25pps flake cement with 100% open hole cement excess ran and the cement displaced with 67 barrels of fresh water and good cement returns to surface. The cement mix water was tested for PH & Chlorides.
0711875249 2018-03-07 Production Wells No Violations On this day, I accompanied ODNR Inspector William Stolarik to witness a controlled annular pressure release into a tank. Please refer to his comments for a detailed report. We spoke with Antero company man Doug Stebbens about the process. It took approximately 15 seconds to bleed off the annular pressure. The well is equipped with annular pressure monitoring devices. Concrete barriers surround the wellheads. The facility is gated with an electronic shutdown button on the left-hand side, prior to the pad. The front of the pad is equipped with (8) 400 barrel steel tanks within containment. There are (5) gas processing units along the back of the pad, and a midstream facility along the left side.
0775537045 2016-01-21 Production Wells No Violations Status check inspection to document the well head working pressures. The 2.875 production tubing has 5,600 psi, the 5.5 casing has 6,185 psi internally and zero externally, the 9.625 has 300 psi shown as a constant pressure for the last 3 days.
1236968512 2015-01-14 Casing String Witnessed No Violations I am onsite to witness the surface casing installation and cementing operations. Dallas Morris Rig 24 drilled 395 of 24 diameter hole. The rig crew then installed 395 of 18.625 J-55 casing with a Texas shoe and a float collar. I performed a test of the cement mix water with a low range Quantab, the test indicated that the total dissolved chlorides were present at a concentration of 82 parts per million. Allied Oil and Gas Services pumped 775 sacks of class A cement with .125 pounds per sack flowseal and 2% CaCl into the casing with 59 barrels of the cement circulating back to surface. I verified the cement weight at 15.8 ppg and 15.6 ppg during the job. The plug was landed and the casing integrity test passed with no bleed off.
1270468778 2017-08-25 Preliminary Restoration No Violations Preliminary Restoration status check inspection found the area affected by the well pad construction meets ORC 1509.072 with vegetation established and erosion control in place. The lease road is gated and identification signs are in place. There is emergency shut down devices at the well pad entry point and tank battery and also at the electrical service point for the gas processing units. The well is equipped with a casing and tubing head with flow lines attached to each well head outlet. A primary master valve is in place on the tubing head with (2) master valves present down stream in the production flow line. The casing head also has (2) master valves present. A gas processing unit is present on the well pad along with units supporting the other 4 wells on the pad. At the production facility a total of (8) steel construction 400 barrel capacity tanks are present inside a polymer lines steel containment dike area. Proper well head identification is posted at each well. Annular pressure monitoring gauges are present showing 3600 psi on the 9.625 diameter casing annulus and 1500 psi on the 13.375 . Doug Stebbins with Antero was notified.
1421600585 2015-01-18 Drill / Deepen / Reopen No Violations Status check inspection on the current drilling progress found Dallas Morris rig # 24 on the hole with the 13.375 1st intermediate recently set to a depth of 2,219. The rig is currently picking up directional tools to run in and begin grilling out from under the 13.375 and begin their 12.250 section and well bore deviation.
1511069585 2018-03-07 Production Wells No Violations On site inspection along with ODNR Inspector Tom Thomas and Antero employee Doug Stebbins. The intention of the inspection is to discuss and review annular pressures. The said well was observed to be in production and to have annular pressure gauges present on the 13.375 casing well head section and 9.625 casing well head section. The pressure between the internal of the 13.375 and external of the 9.625 was 50 psi. The pressure between the internal of the 9.625 diameter casing and the external of the 5.5 diameter production casing is 1,500 psi. The pressure on the 9.625 well head section was blead off on this day down to a static point in less than 20 seconds. The company will monitor and record the pressure every 24 hours in the proceeding days. The 9.625 diameter casing well head pressure was blead down from 2,200 psi to a static level on 03/05/2018 and had built up 1,500 psi in 48 hours.
373887263 2015-1-13 0:00: DD No Violations 2.00
693015416 2014-11-30 0:00 CS No Violations
70657903 2015-11-9 0:00: PL No Violations 0.50
711875249 2018-3-7 0:00:0 PW No Violations 0.50
775537045 2016-1-21 0:00: PW No Violations
991378301 2020-3-31 0:00: PW No Violations 1.00

For data sources see[10]

References

  1. ↑ "Risk Based Data Management System - Well, tblLocational, tblPlugWell, tblInspection, tblCivilTownships and tblPad Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  2. ↑ "Risk Based Data Management System - Well and WellHistry Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  3. ↑ "Risk Based Data Management System - Perfs Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  4. ↑ "FracFocus Fracking Chemicals Database". 2019-04-02. Retrieved 2019-06-19. 
  5. ↑ "Risk Based Data Management System - tblStimulation Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  6. ↑ "Risk Based Data Management System - Production Table - Oil and Gas Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  7. ↑ "Combined Production - Oil and Gas Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  8. ↑ "Risk Based Data Management System - Production Table - Brine Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  9. ↑ "Combined Production - Brine Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  10. ↑ "Risk Based Data Management System - tblInspection, tblInspFail and tblinspFlDesc Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
Retrieved from "https://wellwiki.org/index.php?title=34-111-24551&oldid=14106872"