X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-111-24780

Well Details

Well ID: 34-111-24780
Loading map...
Country: United States
State: Ohio
County: Monroe
Municipality: Center Township
Operator Name: GULFPORT APPALACHIA LLC
Well Pad ID: US-OH-001439
Farm/Lease Name: PAULUS 211267
License Status: Producing
License Date: 2017-10-18
Spud Date: 2017-09-27
Spud Drilling Contractor: PIONEER DRILLING
Final Drill Date: 2017-11-17
Well Total Depth: 18124.00 ft
Configuration: Horizontal
Latitude: 39.740000
Longitude: -81.060000

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2017-09-18 Proposed Formations:TRENTON, Issued Date:9/18/2017, Expired Date:9/18/2019 12:00:00 PM, Drilling unit acres:0, Proposed Well Type:ST, Proposed Well Class:STRT
Correction to Well 2017-09-29 CORRECTION TO QUAD AND X,Y COORDINATES
APP 2017-10-18 Proposed Formations:UTICA/POINT PLEASANT, Issued Date:10/18/2017, Expired Date:10/18/2019 12:00:00 PM, Drilling unit acres:373.3, Proposed Well Type:OG, Proposed Well Class:POOL
Reached Total Depth 2017-11-17 STATUS PER OPERATOR TELEPHONE CONVERSATION ALE 03/12/2018
Record Last Modified 2018-08-23 STATUS PER OPERATOR TELEPHONE CONVERSATION ALE 03/12/2018
Correction to Well 2018-08-24 TAKE TARGET AS-DRILLED
Construction Permit Expires 2019-10-18 STATUS PER OPERATOR TELEPHONE CONVERSATION ALE 03/12/2018

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
17882 17998 0
10297 10449 0
10297 10449 0

For data sources see[3]

Fracking Activities

Fracking Jobs

Job Number Job Start Date Job End Date True Vertical Depth (ft) Total Water Volume (gal) Total Non-Water Volume (gal)
1 03/09/2019 03/29/2019 9931 16,347,000.0 0

Fluid Composition Data

Job Number Trade Name Supplier Purpose Ingredient Name CAS Number Additive Percentage by Mass Job Percentage by Mass Mass Used (lb)
1 SAND-PREMIUM WHITE-40/70, BULK Halliburton Proppant Listed Below Listed Below 0 0 0
HYDROCHLORIC ACID Halliburton Solvent Listed Below Listed Below 0 0 0
SCALECHEK LP-70 Halliburton Scale Inhibitor Listed Below Listed Below 0 0 0
FDP-S-1296-17 Halliburton Corrosion Inhibitor Listed Below Listed Below 0 0 0
Acrylamide acrylate polymer Proprietary 30 0.0268579 41706
Inorganic salt Proprietary 30 0.0268579 41706
Quaternary ammonium compounds,

benzyl-C12-16-alkyldimethyl chlorides

68424-85-1 5 0.00163711 2543
Sodium polyacrylate 9003-04-7 1 0.000160028 249
Hydrochloric acid 7647-01-0 15 0.316583 80357
Acrylic acid 79-10-7 0.01 0.00000160 3
Propargyl alcohol 107-19-7 5 0.00001376 22
Hydrotreated light petroleum distillate 64742-47-8 30 0.0268579 41706
Phosphoric acid 7664-38-2 0.1 0.00003274 51
Methanol 67-56-1 100 0.000321111 500
Telmer Proprietary 10 0.00160028 2485
Ethanol 64-17-5 1 0.000327422 509
Glutaraldehyde 111-30-8 30 0.00982265 15253
Ethoxylated alcohols Proprietary 5 0.00001376 22
Modified thiourea polymer Proprietary 30 0.00008258 129
Crystalline silica, quartz 14808-60-7 100 11.6425 18,078,800.0
Ethylene glycol 107-21-1 60 0.00960169 14910
Fresh Water Operator Base Fluid Water 7732-18-5 100 87.6913 136,170,000.0
SAND-COMMON WHITE-100 MESH, SSA-2, BULK (100003676) Halliburton Proppant Listed Below Listed Below 0 0 0
EXCELERATE PS-2 Halliburton Friction Reducer Listed Below Listed Below 0 0 0
Ingredients Listed Above Listed Above Water 7732-18-5 100 0.618132 959857
MC B-8614 Halliburton Biocide Listed Below Listed Below 0 0 0

For data sources see[4]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1099729351 2018-9-24 0:00: CT No Violations 0.30
-1212976502 2017-10-19 0:00 CS No Violations 5.00
-1841242938 2018-6-18 0:00: CT No Violations 0.10
-683479849 2017-9-28 0:00: DD No Violations 0.50
0683479849 2017-09-28 Drill / Deepen / Reopen No Violations Status check inspection on the well drilling process found Precision Drillings top hole conductor rig on the hole and drilling a 30 conductor borehole. The well was spudded on this day and will be drilled to 110 and 26 conductor will be set and cemented to surface.
0797511349 2017-11-14 Drill / Deepen / Reopen No Violations
1099729351 2018-09-24 Completion Testing No Violations Status update inspection found a total of 10 wells present on this well pad. All 10 have been drilled and not completed. Each well is equipped with a lower A and upper well head section with 2 diameter riser pipes present on each section with valves and gauges present on each section for annular pressure monitoring. The casing head does have a multi valve set up with a mechanical gauge present. No tubing is in the well. No production equipment is present on the well pad other than the 3rd party mid stream pipeline. The well pad does have an earthen berm in place. The well pad surface and lease road is of stone construction and in good repair. Addressing the preliminary restoration. There is an area along the lease road that is within the well site boundary that was recently disturbed by the installation of a transportation pipeline. There is also a area on the West side of the well pad that was disturbed and vegetation not established. Larger diameter wooden poles are set on the East side of the well pad along the pad surface boundary for sound barrier during stimulation. There are (2) 12 diameter trunk lines that have been laid along the well pad perimeter, these lines are fresh water lines to support the stimulation process. The lease road does have a gate present.
1212976502 2017-10-19 Casing String Witnessed No Violations On this day, I accompanied ODNR Inspector William Stolarik. Please refer to his comments for a detailed report. On this day we are on-site to witness the surface string being cemented. Pioneer rig 73 had drilled to a total depth of 1390 feet and Stingray Pressure Pumping is on location to cement the surface casing. Witnessed cement returns to surface.
1508406730 2017-10-19 Casing String Witnessed No Violations On site inspection to witness the surface casing cement job accompanied by ODNR Inspector Tom Thomas. Pioneer Drilling rig # 73 is on location and rigged up on the hole. The rig has drilled a 17.5 diameter surface borehole to a measured depth of 1,390 off of a drilling rig Kelly Bushing heigth of 28.5. The rig pulled the drill string after making 3 soap sweeps to condition the well bore and then inserted 1,390 of 13.375 diameter buttress thread J-55 grade casing with a guide shoe and float collar casing equipment ran along with 9 casing centralizers. Circulation was established with the drilling rig while landing the last 2 casing joints. Upon landing of the casing 2 bottoms up circulation cycles were pumped before turning the job over to Stingray who cemented the casing by first installing the cement head and then pumping 25 barrels of 6% gel spacer followed by a 263 barrel cement slurry consisting of 1,251 sacks of class A cement. The cement was displaced with 207 barrels of fresh water to the float collar with the casing being pressure tested to 1,175 psi with a final displacement pressure of 606 psi. Cement returns were witnessed at 180 barrels into displacement.
1512488185 2017-12-05 Production Wells No Violations Status check inspection to document the well completion status. Pioneer Drilling rig 73 drilled the 8.5 diameter production borehole to a measured depth of 18,124 measured off a drilling rig Kelly busing heigth of 28.6 above ground level. The rig pulled the drill string and inserted 5.5 diameter production casing and cemented it on 11/19/2017. The cement displacement was 400 barrels and upon reaching total displacement the cement plug did not land with a final displacement pressure of 3,300 psi, the cement company checked to see if the string floats were isolated and the well flowed back 6 barrels of fluid indicating the plug was not latched and the floats were not holding. At that point the well was shut in with 3,300 psi on the casing and the cement allowed to cure before setting a isolation bridge plug inside the 5.5 diameter casing to allow the well head blow out preventer to be removed and the night cap put on the well.
1665651512 2019-05-16 Completion Testing No Violations On this day, I found the drilling and hydraulic fracturing processes are completed. The frac plugs have been drilled out and the well is currently in the flowback stage. I spoke with Gulfport Representatives Corey Cloud and Robert Coots during the inspection. Annular pressure monitoring devices are in place and pressures are logged daily. Identification is posted at the wellhead.
1740832262 2018-09-24 Completion Testing No Violations Status update inspection found a total of 10 wells present on this well pad. All 10 have been drilled and not completed. Each well is equipped with a lower A and upper well head section with 2 diameter riser pipes present on each section with valves and gauges present on each section for annular pressure monitoring. The casing head does have a multi valve set up with a mechanical gauge present. No tubing is in the well. No production equipment is present on the well pad other than the 3rd party mid stream pipeline. The well pad does have an earthen berm in place. The well pad surface and lease road is of stone construction and in good repair. Addressing the preliminary restoration. There is an area along the lease road that is within the well site boundary that was recently disturbed by the installation of a transportation pipeline. There is also a area on the West side of the well pad that was disturbed and vegetation not established. Larger diameter wooden poles are set on the East side of the well pad along the pad surface boundary for sound barrier during stimulation. There are (2) 12 diameter trunk lines that have been laid along the well pad perimeter, these lines are fresh water lines to support the stimulation process. The lease road does have a gate present.
1841242938 2018-06-18 Completion Testing No Violations On this day, I am conducting an inspection per request of ODNR Inspector William Stolarik. I spoke with Company Man, Ken Miller, during my inspection. (10) wells were drilled on the pad. They are currently plumbing the intermediate and surface casing, at the wellhead, and preparing to install pressure monitoring devices. The grates will be replaced over the cellar, when they are finished.
2145687492 2017-10-23 Drill / Deepen / Reopen No Violations Status check inspection on the well drilling progress found Pioneer Drilling rig # 73 on location. The rig has drilled the 12.250 intermediate well bore to a measured depth of 8,088 and is pulling the drill string out of the hole to change out a failed drill bit. The drilling rig and support equipment is situated on polymer containment and the well pad earthen berm is serving as the primary containment with the drain valves in the closed position. The rig has approximately 700 to drill before reaching total depth for this section.
797511349 2017-11-14 0:00 DD No Violations

For data sources see[5]

References

  1. ↑ "Risk Based Data Management System - Well, tblLocational, tblPlugWell, tblInspection, tblCivilTownships and tblPad Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  2. ↑ "Risk Based Data Management System - Well and WellHistry Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  3. ↑ "Risk Based Data Management System - Perfs Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  4. ↑ "FracFocus Fracking Chemicals Database". 2019-04-02. Retrieved 2019-06-19. 
  5. ↑ "Risk Based Data Management System - tblInspection, tblInspFail and tblinspFlDesc Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
Retrieved from "https://wellwiki.org/index.php?title=34-111-24780&oldid=14109048"