X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-111-24517

Well Details

Well ID: 34-111-24517
Loading map...
Country: United States
State: Ohio
County: Monroe
Municipality: Adams Township
Operator Name: ECLIPSE RESOURCES I LP
Well Pad ID: US-OH-001116
Farm/Lease Name: SAWYERS
License Status: Plugged Back
License Date: 2014-09-19
Spud Date: 2014-12-30
Spud Drilling Contractor:
Final Drill Date:
Well Total Depth:
Configuration: Directional
Latitude: 39.760000
Longitude: -80.980000

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2014-09-19 Proposed Formations:TRENTON, Issued Date:9/19/2014, Expired Date:9/18/2016 12:00:00 PM, Drilling unit acres:642.864, Proposed Well Type:ST, Proposed Well Class:STRT
Plugged Back 2015-02-04
Construction Permit Expires 2016-09-18
Record Last Modified 2017-10-23

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2015-08-24 10631 16876 0
10631 16876 0
10631 16876 0

For data sources see[3]

Fracking Activities

Fracking Jobs

Job Number Job Start Date Job End Date True Vertical Depth (ft) Total Water Volume (gal) Total Non-Water Volume (gal)
1 04/30/2015 05/01/2015 10169 10,684,500.0 0

Fluid Composition Data

Job Number Trade Name Supplier Purpose Ingredient Name CAS Number Additive Percentage by Mass Job Percentage by Mass Mass Used (lb)
1 3rd Party Biocide, 3rd Party Scale Inh Aqua One Source Biocide, Scale Inhibitor NA NA 0 0 0
BA-40L BUFFERING AGENT, BC-140,

FR-66, FR-76, LCA-1, OPTIFLO-HTE, SAND-COMMON WHITE-100 MESH, SSA-2, BULK (100003676), SAND-CRC-20/40, BULK, SAND-PREMIUM WHITE-40/70, BULK, SP BREAKER, WG-36 GELLING AGENT

Halliburton Breaker, Buffer, Crosslinker, Friction Reducer, Gelling Agent, Proppant, Solvent NA NA 0 0 0
Hazardous and Non-Hazardous Ingredients Hydrochloric acid 7647-01-0 60 0.49598 490586
Ethylene glycol 107-21-1 30 0.0115326 11408
Hexamethylenetetramine 100-97-0 2 0.00927488 9174
Sodium Hydroxide 1310-73-2 4 0.00124789 1235
Sodium chloride 7647-14-5 30 0.0187286 18526
Dazomet 533-74-4 24 0.00748731 7406
NA NA 0 0 0
Crystalline Silica, Quartz 14808-60-7 0.1 0.00009093 90
Phenol / formaldehyde resin 9003-35-4 5 0.0231872 22935
Surfactant mixture Confidential 1 0.00181868 1800
Monoethanolamine borate 26038-87-9 60 0.0230653 22815
Sodium sulfate 7757-82-6 0.1 0.00000343 4
Potassium carbonate 584-08-7 60 0.00182606 1807
Amide Confidential 5 0.00215902 2136
Alcohols ethoxylated Confidential 5 0.00215902 2136
Hydrotreated light petroleum distillate 64742-47-8 30 0.0295237 29204
Water 7732-18-5 100 0.910572 900672
Polyacrylamide copolymer Confidential 30 0.0129541 12814
Walnut hulls NA 100 0.00723368 7155
Sodium persulfate 7775-27-1 100 0.00342728 3390
Cured acrylic resin Confidential 30 0.00224244 2219
Silica gel 112926-00-8 1 0.000909342 900
Bentonite, benzyl(hydrogenated

tallow alkyl) dimethylammonium stearate complex

121888-68-4 5 0.00454671 4498
Crystalline silica, quartz 14808-60-7 100 8.79963 8,703,920.0
Ammonium chloride 12125-02-9 5 0.00215902 2136
C.I. Pigment Red 5 6410-41-9 1 0.00007234 72
Guar gum 9000-30-0 100 0.0909342 89946
Enzyme Confidential 5 0.000361684 358
Paraffinic solvent Confidential 100 0.00126762 1254
Acrylamide acrylate polymer Confidential 30 0.0165696 16390
Sorbitan, mono-9-octadecenoate, (Z) 1338-43-8 1 0.000431804 428
Sorbitan monooleate polyoxyethylene derivative 9005-65-6 1 0.000431804 428
Fresh Water Operator Base Fluid Fresh Water 7732-18-5 100 90.0881 89,108,200.0
HYDROCHLORIC ACID Halliburton Base Fluid NA NA 0 0 0

For data sources see[4]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
2015 ECLIPSE RESOURCES I LP Brine 20239 187
2016 ECLIPSE RESOURCES I LP Brine 13700 360
2017 ECLIPSE RESOURCES I LP Brine 5588 363
2018 ECLIPSE RESOURCES I LP Brine 3240 359
2019 ECLIPSE RESOURCES I LP Brine 710 89

For data sources see[5] [6]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1063504741 2016-6-6 0:00:0 PL No Violations 0.60
-1156051199 2020-7-13 0:00: PW No Violations 0.70
-1300968190 2015-8-4 0:00:0 PL No Violations 0.70
-1374187246 2020-7-16 0:00: PW No Violations 1.50
-1376399722 2020-3-11 0:00: PW No Violations 1.00
-267683163 2015-8-4 0:00:0 PL No Violations 0.70
-754095558 2018-3-8 0:00:0 PW No Violations 0.40
0267683163 2015-08-04 Preliminary Restoration No Violations Preliminary Restoration status check inspection found the affected area depicted in the pre-site has been properly restored with proper vegetation and erosion control present, the well site meets ORC 1509.072. Addressing the well head -The well drilling and completion phase is now complete and the well is producing with 2.875 production tubing set in the well bore. There is 3 gas processing units on location one for each existing well along with gas metering equipment. There is a metal type poly lined containment dike supporting the 3-400 barrel and one single 100 barrel production tanks on location. Proper well identification is posted and the location is secured by a 6 woven wire fence with a emergency shut down button located at the entry point to the well pad.
0363798771 2015-06-04 Completion Testing No Violations Status check inspection on the well completion process found Deep Well Services Snubbing Unit on location and pulling the tubing work over string out of the hole after completing the drilling out of the well bore completion plugs. Excell Energy is on location providing Blow Out Preventer and work over pump services along with Tetra Flow Back services. Upon the recovery of the work over string 2.875 production tubing shall be ran into the well bore and set in the horizontal curve at 80 degrees with a total depth of 10,250.
0754095558 2018-03-08 Production Wells No Violations On site inspection to document the well head annular pressures. The 13.375 well head had (0) zero pressure and the 9.625 well head had 1,700 (PSI) pounds per square inch pressure. The production tubing valves were open along with the (ESD) Emergency Shut Down valve. The location has several emergency shut down control points identified at the well pad entrance- at each of the (3) wells total on the well pad - at the production fluid facility and the gas processing units. The well is producing of the tubing head assembly. On this day I spoke with a company HSE representative identified as Bruce Carpenter and we discussed the annular pressure on this well and the rest of the wells on the pad. I have asked the company to monitor and record all annular pressures and address any problematic wells that may have pressures present that could compromise the well head or casing integrity.
1063504741 2016-06-06 Preliminary Restoration No Violations Preliminary Restoration status check inspection found the area affected by the well pad construction meets ORC 1509.072 with erosion control and vegetation established . 3-400 barrel capacity storage tanks are on site located in a polymer lined steel containment dike. The well is in production and annular pressure monitoring is in place.
1300968190 2015-08-04 Preliminary Restoration No Violations Preliminary Restoration status check inspection found the affected area depicted in the pre-site has been properly restored with proper vegetation and erosion control present, the well site meets ORC 1509.072. Addressing the well head -The well drilling and completion phase is now complete and the well is producing with 2.875 production tubing set in the well bore. There is 3 gas processing units on location one for each existing well along with gas metering equipment. There is a metal type poly lined containment dike supporting the 3-400 barrel and one single 100 barrel production tanks on location. Proper well identification is posted and the location is secured by a 6 woven wire fence with a emergency shut down button located at the entry point to the well pad.
1367385922 2015-01-18 Drill / Deepen / Reopen No Violations Status check inspection on the current drilling progress found H&P rig 531 on location rigging up and preparing to begin drilling the surface casing borehole in the next 24 hours.
1420039520 2014-12-31 Casing String Witnessed No Violations The said well was spudded on 12/30/2014 by Precision Rat hole Services with a 120 x 30 conductor borehole being drilled and 120 x 24 conductor pipe ran and set. Universal well service is on location to cement the conductor using 305 sacks of type 1 2% calcium .25 pps flake 40% open hole excess cement with good cement returns to surface. The cement mix water was tested and showed 56 parts per million chlorides and a PH level of 7.
1421755085 2015-01-20 Casing String Witnessed No Violations 01/19/15 Notification was received that the company has hit a reported mine void @ 305 to 312, I spoke with my Supervisor Brent Bear and permission was granted to set a 18.625 mine string with notification through E-Mail being sent to the Division permitting section. On 01/20/15 I witnessed the cementing of the mine string with Schlumberger Cement service on location to cement the casing with the bottom balance job being implemented with a 35 barrel 149 sack class A cement mix. The annular side above the mine void was topped off from surface with a initial 37 sack mix spotted and allowed to set before topping the remaining annular volume off. The company men on site were informed that any casing set with a total length of 200 or more must be pressure tested under 1501:9-1-08 (3).
1422057814 2015-01-23 Casing String Witnessed No Violations Administrative report to document the surface casing cement job missed on 01/22/2015 due to being sick. The company man was in contact with me throughout the evening on 01/21/2015 in regards to the upcoming cement job slated for approximately 10:00 pm with the job being delayed due to a mechanical failure in route of a cement truck. The company man notified me @ 12:00 am for a 2:00 am approximate cment job start time. I informed him that I was very ill and would not be out. We then reviewed the job by phone and agreed they would contact me if they needed anything. A 17.5 surface hole was drilled to 1,610 and 1,592 of 61# J-55 casing was ran with a guide shoe and float collar along with proper centralizer placement demonstrated, Schlumberger cement service will cement the casing using 1142 sacks of class A-15.6# 1.21 yield cement with 20 bbls of 6% gel spacer ran ahead of the cement and the casing pressure tested to 500 psi over lift pressure upon the landing of the cement plug and 30 bbls of reported good cement returns to surface. H&P Rig 531 is on location.
1422894442 2015-02-02 Drill / Deepen / Reopen No Violations Status check inspection on the drilling process found H&P drilling rig 531 on location with the vertical stratagaphical test 8.750 well bore being drilled to a TD of 10,350 and Schlumber wire line service is on location to log the well bore. A plug back-kick plug is scheduled to be set on 02/03/15. 3rd party contractors are on location with vacuum trucks recovering water generated on location from recent rainfall.
1422999922 2015-02-03 Production Wells No Violations On site inspection for a 14:00 pm callout to set the bottom hole stratigraphic test plug. Upon arrival I was informed that the Company Engineer had requested additional formation logging and it would be another 9 hours before they were ready to cement. A review of the plugging plan found 2 plugs will be set with a completed estimated top of cement to be 9,035. The plugs will be set through the drill string.
1423142867 2015-02-05 Plug / Plug Back No Violations Bottom hole stratagraphic test hole plug back on active shale well administrative report. The well total drilling depth was reached @ 10,350 on 02/02/2015 with the next 36 hours spent doing geological borehole surveys by Schlumberger well surveys. I was on location @ for a 14:00 pm call out on 02/03/15 to set the bottom hole plug and kick plug but the company reported they had requested additional surveys and would be at least 9 hours with the plugging taking place @ 2:00 am the next morning. A review of all plugs and depth was done and approved prior to my departure on 02/03/15. With all records received.
1423603207 2015-02-10 Drill / Deepen / Reopen No Violations Status check inspection on the current drilling progress found H&P Drilling rig 531 on location drilling the 8.5 horizontal well bore section at a depth of 16,750 using 12.4# synthetic oil based drilling mud in the directional azimuth of 148.12 degrees with a true vertical well depth of 10,163 and a proposed total depth of 17,170.
1768070425 2020-7-1 0:00:0 PW No Violations 0.40
363798771 2015-6-4 0:00:0 CT No Violations 3.00

For data sources see[7]

References

  1. ↑ "Risk Based Data Management System - Well, tblLocational, tblPlugWell, tblInspection, tblCivilTownships and tblPad Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  2. ↑ "Risk Based Data Management System - Well and WellHistry Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  3. ↑ "Risk Based Data Management System - Perfs Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  4. ↑ "FracFocus Fracking Chemicals Database". 2019-04-02. Retrieved 2019-06-19. 
  5. ↑ "Risk Based Data Management System - Production Table - Brine Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  6. ↑ "Combined Production - Brine Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  7. ↑ "Risk Based Data Management System - tblInspection, tblInspFail and tblinspFlDesc Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
Retrieved from "https://wellwiki.org/index.php?title=34-111-24517&oldid=14106568"